1 :

Hint : 💁‍♂️Use the concentration to determine how many mL provide 10 mEq.

Correct Answers:

  • 125


Rationale :

💧The order is for 10 mEq/hr and the solution contains 80 mEq in 1000 mL.

🧪Using ratio: 80 mEq ÷ 1000 mL = 0.08 mEq/mL → 10 ÷ 0.08 = 125 mL/hr.

📏This ensures the infusion rate delivers the correct amount of potassium per hour.

⚠️Always monitor infusion concentration closely when giving electrolytes to prevent complications.

📌Core Message

Use the concentration-to-dose ratio to determine the correct mL/hr rate for electrolyte infusions.

2 :

Hint : 🤦‍♂️Divide the ordered dose by the concentration on the syringe label.

Correct Answers:

  • 0.9


Rationale :

💉Available concentration is 100 mg/mL.

🧪90 mg ÷ 100 mg/mL = 0.9 mL.

📏Low-volume anticoagulant injections must be measured precisely to prevent bleeding risks.

💊Dosing errors with enoxaparin can lead to life-threatening complications.

📌Core Message

Divide the ordered dose by the available strength to determine the exact volume in mL.

3 :

Hint : 🔍Determine the mg/mL from the vial before converting to mL.

Correct Answers:

  • 0.8


Rationale :

📦Streptomycin available as 1 g in 2.5 mL → 1000 mg ÷ 2.5 mL = 400 mg/mL.

🧪300 mg ÷ 400 mg/mL = 0.75, rounded to 0.8 mL.

💉Streptomycin dosing must be precise to avoid ototoxicity and nephrotoxicity.

📏Administering exact volumes helps ensure therapeutic efficacy without overdosing.

📌Core Message

Find mg per mL using vial label, then divide the prescribed dose to get volume to inject.

4 :

Hint : 🧠Multiply rate by time to find infused volume, then subtract from original.

Correct Answers:

  • 375


Rationale :

🕒5 hours × 125 mL/hr = 625 mL already infused.

💧1000 mL – 625 mL = 375 mL remaining.

📏Tracking remaining volume helps ensure accurate fluid balance and prevent under- or over-infusion.

🧪Always subtract the infused amount from the original total to determine what's left.

📌Core Message

Calculate infused volume, subtract from total bag volume to find fluid remaining.

5 :

Hint : 📘Use the Celsius-to-Fahrenheit formula with exact decimals.

Correct Answers:

  • 97.7


Rationale :

📏Use the formula: (°C × 9 ÷ 5) + 32 → (36.5 × 9 ÷ 5) + 32 = 65.7 + 32 = 97.7°F.

🧪This is a standard temperature conversion required in documentation.

📋Fahrenheit is often used in U.S. clinical charts for consistency.

💉Correct conversion ensures accurate client records.

📌Core Message

Apply the temperature conversion formula to record accurate Fahrenheit values from Celsius.

6 :

Hint : 👉Determine the concentration first, then convert mg/min to mL/hr.

Correct Answers:

  • 6


Rationale :

📦200 mg labetalol in 200 mL = 1 mg/mL.

🧪2 mg/min = 2 mL/min

💁‍♂️2 × 60 = 120 mL/hr

👍2 mg/min ÷ 1 mg/mL = 2 mL/min × 60 = 120 mL/hr.

📌Core Message

Divide mg/min by concentration, then convert to mL/hr for correct infusion rate.

7 :

Hint : 📘Calculate mcg dose based on weight, then convert to volume using vial label.

Correct Answers:

  • 1


Rationale :

⚖️59 kg × 5 mcg = 295 mcg.

📦Available: 300 mcg/mL → 295 ÷ 300 = 0.983, rounded to 1 mL.

📏SUBQ medications like filgrastim must be administered in precisely calculated volumes.

🧪Rounding ensures the dose is within safe therapeutic range.

📌Core Message

Multiply weight by mcg/kg, then divide by mcg/mL concentration to determine volume to give.

8 :

Hint : 🤦‍♂️Divide total volume by time in hours to find mL/hour.

Correct Answers:

  • 83


Rationale :

📦1000 mL ÷ 12 hours = 83.3, rounded to 83 mL/hr.

🧪This is a standard fluid replacement calculation to prevent dehydration.

📏Round infusion rates to whole numbers for pump programming.

💧Ensures the client receives steady IV fluid therapy.

📌Core Message

Divide fluid volume by hours to calculate the infusion pump rate.

9 :

Hint : 🧨Divide the ordered mg dose by the mg/mL on the vial label.

Correct Answers:

  • 0.7


Rationale :

📦35 mg ÷ 50 mg/mL = 0.7 mL.

📏This delivers the correct dose for IM antiemetic therapy.

🧪Always round to the nearest tenth when using viscous IM medications.

💉Volume accuracy avoids both underdosing and injection complications.

📌Core Message

Use dose ÷ concentration to get the correct IM injection volume.

10 :

Hint : 🧠Multiply rate by drop factor, then divide by 60 to find gtt/min.

Correct Answers:

  • 56


Rationale :

📦2000 mL over 12 hr = 167 mL/hr.

🧮(167 × 20) ÷ 60 = 3340 ÷ 60 = 55.6, rounded to 56 gtt/min.

📏Use total volume and drop factor to set manual IV flow rate.

💧Rounding ensures consistent gravity infusion using standard IV tubing.

📌Core Message

Calculate gtt/min by multiplying rate by drop factor, then dividing by minutes per hour.

Total Questions: 10

Choose Different Exam !